The Standard in Tube Cleaning

CONDENSER Tube Cleaning – The Methods

Condenser & Heat Exchanger Services, Inc. will mechanically clean any condenser or heat exchanger tubes, in various diameters, straight or u-bend.

After proper assessment of the units specific conditions, a cleaning device and system will be selected. All procedures are safe to all plant components.

Air/Water Propelled System

---

Abrasive or Nonabrasive Balls For light to moderate soft deposits. Balls will also be used for u-bend sections.
Plastic Scrubbers For moderate to heavy soft deposits.
Nylon Bristle Brushes For heavy soft deposits. Brushes are specifically sized for maximum cleaning. Nylon brushes flex slightly to maintain maximum contact and scrubbing action along the full length of the tube.
	Top

Mechanical System

---

Rotating Flexible Shaft Nylon Brushes For all soft deposits. Rotating mechanical devices will be used to clean u-bend tubes and units with an unaccessible exhaust end.
Metal Brushes/Cutters/Buffers For all hard deposits. Rotating Rigid Shaft.
Drill Bits For all extremely hard deposits.
	Top

Water Pressure System

---

Bronze Bladed Cleaners For hard scale. Bronze cleaners are specifically designed for removal of scale on soft tube materials such as copper-nickel, brass, etc.
Steel Bladed Cleaners For hard scale. Steel cleaners are specially designed for removal of scale on titanium or stainless steel tubing. All metal bladed cleaners are oversized for maximum contact to remove scale and deposits.
	Top